📄️ 2.1 Network & Bluetooth Configuration
This section mainly introduces the methods for modifying the wired and wireless network configurations of the development board.
📄️ 2.2 srpi-config Configuration Tool User Guide
The srpi-config configuration tool is only applicable to the RDK X3 and RDK X3 Module development boards and is not suitable for the RDK Ultra development board.
📄️ 2.3 config.txt Configuration File
RDK uses the configuration file config.txt to set system configurations during startup. config.txt is read during the uboot stage and supports modifications to device tree configurations, IO pin states, ION memory, CPU frequency, etc. This file is usually accessible from Linux at /boot/config.txt and must be edited as the root user. If the config.txt file does not exist but there are configuration settings, simply create it as a new text file.
📄️ 2.4 Thermal Control and CPU Frequency Management
The following information does not apply to the RDK Ultra development board.
📄️ 2.5 Autostart Programs on Boot
Video//www.youtube.com/watch?v=9NwFttgPeE&list=PLSxjn4YS2IuFUWcLGj2uuCfLYnNYw6Ld&index=4